Care of your webbing hospitality furniture

New webbing furniture is clean, but not always fully protected. By giving it a proper treatment beforehand, you can prevent many problems in the future and keep your webbing furniture looking as good as new for as long as possible.

Step-by-step plan for initial treatment

1. Gentle Wiping
   Before using your webbing furniture, it is advisable to gently wipe the surface with a lightly damp cloth to remove any dust from the manufacturing process. Webbing is sensitive to drying out, so avoid placing the furniture directly next to a heat source or in strong sunlight.

2. Optional Treatment
   You can optionally treat the webbing with a transparent, moisturizing spray based on natural oils or a specialised rattan product to maintain its elasticity and prevent cracking.

3. Drying and Curing
   Allow the furniture to dry for at least 12 hours and do not use it during this time.

In the hospitality industry, webbing furniture is exposed to spills, crumbs, and wear on a daily basis. With a few simple routines, you can keep it looking fresh and well-maintained.

Step-by-step maintenance plan in use

1. Weekly Vacuuming: Vacuum the webbing weekly using a soft brush attachment, or use a duster to remove dust and dirt from the openings in the weave. Avoid overloading the seat or backrest—webbing is resilient but not designed to bear heavy weight for extended periods. Maintain proper humidity in the room, as overly dry air can cause the material to dry out and crack.

2. Daily Stain Removal: Blot, Don’t Rub: When dealing with stains, it’s important to be gentle. Use a soft cloth lightly dampened with lukewarm water and a small amount of mild soap. Do not rub vigorously; instead, blot or gently wipe in the direction of the weave.

3. Allow the Webbing to Dry Properly: After cleaning, let the webbing air dry naturally, preferably out of direct sunlight. Never use harsh cleaning agents or excessive water, as this can weaken the natural material.

After a busy season or intensive use, the webbing may look a little dull or stained. In that case, a thorough cleaning is required.

Step-by-step plan for large maintenance

1. Deep Cleaning: Lightly clean the surface using a soft brush and a damp cloth with mild soap.

2. Aftercare: Allow it to dry thoroughly, then treat with a natural oil or rattan conditioner to nourish the fibres.

3. Sagging Webbing? For sagging or loose webbing, lightly dampen the underside and let the furniture dry in the shade. This allows the material to recover slightly and tighten again.

To keep webbing furniture looking beautiful and maintaining its strength for as long as possible, regular maintenance is essential. Avoid direct sunlight, high temperatures, and damp conditions. Clean the weave regularly and occasionally nourish it with a natural oil or a specialised rattan care product to prevent drying out. By handling the material with care, webbing retains its natural charm, resilience, and handcrafted appearance for years, making it a timeless choice for stylish and durable hospitality furniture.

Back to overview